'TestPart-CNC-5_Engraving-1-SCREWS.sbp
'----------------------------------------------------------------
'Shopbot router file for MANUAL Tool Change setup (MTC)
'GENERATED BY RhinoCam + ShopBot_MTC.spm.
'Postprocessor written at IAAC|FabLabBcn by alex@fablabbcn.org
'Last edit : 1 Oct 2015
'----------------------------------------------------------------
'StockBottom left Corner  X = 0.0000, Y =  0.0000, Z = -15.2000
'StockTopRight Corner  X = 2500.0000, Y =  1250.0000, Z = 0.0000
'Stock Size X = 2500.0000, Y =  1250.0000, Z = 15.2000
'Home X =  0, Y = 0, Z = 0
'UNITS:MM
'----------------------------------------------------------------
IF %(25)=0 THEN GOTO UNIT_ERROR 	'check to see software is set to standard mm
SA  
CN, 90
&Tool = 0  'tool nul,  just in case ATC is active
C6 'Return tool to home in x and y
PAUSE 2
'----------------------------------------------------------------
'Engraving
MS,157.5,63.
'toolChange not effective, but a tool should be loaded with diameter: 6.0 mm, length: 50.0
TR,12000
M3,12.3999,10.8076,21.0000
MS,78.7,31.5
M3,12.3999,10.8076,-5.0000
MS,126.,50.4
MS,157.5,63.
M3,12.3999,10.8076,21.0000
M3,221.6095,9.9150,21.0000
MS,78.7,31.5
M3,221.6095,9.9150,-5.0000
MS,126.,50.4
MS,157.5,63.
M3,221.6095,9.9150,21.0000
M3,12.3999,633.5134,21.0000
MS,78.7,31.5
M3,12.3999,633.5134,-5.0000
MS,126.,50.4
MS,157.5,63.
M3,12.3999,633.5134,21.0000
M3,12.3999,1239.1924,21.0000
MS,78.7,31.5
M3,12.3999,1239.1924,-5.0000
MS,126.,50.4
MS,157.5,63.
M3,12.3999,1239.1924,21.0000
M3,221.6095,1240.0850,21.0000
MS,78.7,31.5
M3,221.6095,1240.0850,-5.0000
MS,126.,50.4
MS,157.5,63.
M3,221.6095,1240.0850,21.0000
M3,962.7305,1240.0850,21.0000
MS,78.7,31.5
M3,962.7305,1240.0850,-5.0000
MS,126.,50.4
MS,157.5,63.
M3,962.7305,1240.0850,21.0000
M3,1726.2723,1240.0850,21.0000
MS,78.7,31.5
M3,1726.2723,1240.0850,-5.0000
MS,126.,50.4
MS,157.5,63.
M3,1726.2723,1240.0850,21.0000
M3,2453.4550,1240.0850,21.0000
MS,78.7,31.5
M3,2453.4550,1240.0850,-5.0000
MS,126.,50.4
MS,157.5,63.
M3,2453.4550,1240.0850,21.0000
M3,2487.6001,633.5134,21.0000
MS,78.7,31.5
M3,2487.6001,633.5134,-5.0000
MS,126.,50.4
MS,157.5,63.
M3,2487.6001,633.5134,21.0000
M3,2453.4550,9.9150,21.0000
MS,78.7,31.5
M3,2453.4550,9.9150,-5.0000
MS,126.,50.4
MS,157.5,63.
M3,2453.4550,9.9150,21.0000
M3,1726.2723,9.9150,21.0000
MS,78.7,31.5
M3,1726.2723,9.9150,-5.0000
MS,126.,50.4
MS,157.5,63.
M3,1726.2723,9.9150,21.0000
M3,962.7305,9.9150,21.0000
MS,78.7,31.5
M3,962.7305,9.9150,-5.0000
MS,126.,50.4
MS,157.5,63.
M3,962.7305,9.9150,21.0000
'----------------------------------------------------------------
'Turning router OFF
C7
END
'
UNIT_ERROR:
CN, 91