<h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Plated Through Hole -24 Pin</h3>
<p>Specifications:
<ul><li>Pin count:24</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_24</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -24 Pin Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:24</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_24</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -24 Pin Locking Footprint</h3>
Holes are offset 0.005" from center, to hold pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:24</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_24</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x3 Shrouded Header</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Shrouded-10pin.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Surface Mount - 2x3 Male Header with Keying Posts</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/15881.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x3 Pogo Pins</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x3</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x3 No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Surface Mount - 2x3</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:2.54mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUEPlated Through Hole -24 Pin
Specifications:
Pin count:24
Pin pitch:0.1"
Example device(s):
CONN_24
Plated Through Hole -24 Pin Long Pads
Specifications:
Pin count:24
Pin pitch:0.1"
Example device(s):
CONN_24
Plated Through Hole -24 Pin Locking Footprint
Holes are offset 0.005" from center, to hold pins in place while soldering.
Specifications:
Pin count:24
Pin pitch:0.1"
Example device(s):
CONN_24
Plated Through Hole - 2x3 Shrouded Header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_03x2
Surface Mount - 2x3 Male Header with Keying Posts
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_03x2
Plated Through Hole - 2x3 Pogo Pins
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_03x2
Plated Through Hole - 2x3
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_03x2
Plated Through Hole - 2x3 No Silk Outline
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_03x2
Surface Mount - 2x3
Specifications:
Pin count:6
Pin pitch:2.54mm
Example device(s):
CONN_03x2
<h3> 24 Pin Connection</h3>>VALUE>NAME<h3>6 Pin Connection</h3>
3x2 pin layout>NAME>VALUE<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208
<p></p>
NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS...
This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side.<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<p></p>
<b>You can populate with any combo of single row headers, but if you'd like an exact match, check these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/12807"> Header - 2x3 (Male, 0.1")</a> (PRT-12807)</li>
<li><a href="https://www.sparkfun.com/products/13010"> Header - 2x3 (Female, 0.1")</a> (PRT-13010)</li>
<li><a href="https://www.sparkfun.com/products/10877"> 2x3 Pin Shrouded Header</a> (PRT-10877)</li>
</ul>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b>Special note: the shrouded connector mates well with our 3x2 ribbon cables:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/10651"> Ribbon Crimp Connector - 6-pin (2x3, Female)</a> (PRT-10651)</li>
<li><a href="https://www.sparkfun.com/products/10646"> Ribbon Cable - 6 wire (15ft)</a> (PRT-10646)</li>
</ul><h3>SparkFun Resistors</h3>
This library contains resistors. Reference designator:R.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>AXIAL-0.3</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>>Name>Value<h3>AXIAL-0.3-KIT</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>
<p><b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>>NAME>VALUE<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 2012 (0805) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 3216 (1206) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEAXIAL-0.3
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.AXIAL-0.3-KIT
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.
Warning: This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.Generic 1005 (0402) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 2012 (0805) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 3216 (1206) package
0.2mm courtyard excess rounded to nearest 0.05mm.>NAME>VALUEGeneric Resistor Package<b>CMOS Logic Devices, 4000 Series</b><p>
Based on the following sources:
<ul>
<li>Motorola <i>CMOS LOGIC DATA</i>; book, 02/88, DL131 REV 1
<li>http://www.elexp.com
<li>http://www.intersil.com
<li>http://www.ls3c.com.tw/product/1/COMOS.html
</ul>
<author>Created by librarian@cadsoft.de</author><b>Dual In Line Package</b>>NAME>VALUE<b>Small Outline package</b> 150 mil>VALUE>NAMEDual In Line PackageSmall Outline package 150 mil>NAME>VALUE>NAMEVDDVSS8-bit static <b>SHIFT REGISTER</b>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.