<h3>SparkFun Microcontrollers</h3>
This library contains microcontrollers.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUED17/RX LEDD15D16D14D8D9#/A8D10#D11#D5#D13#D3#D2D0D1D4/A6TX LEDD12/A10D6#/A7D7A0A1A2A3A4A5<h3>Atmel MCU, 32KByte</h3>
<p>Atmel 44-pin 8-bit Microcontroller with 32KBytes of ISP Flash and USB Controller</p>
<p><a href="http://cdn.sparkfun.com/datasheets/Dev/Arduino/Boards/ATMega32U4.pdf">Datasheet</a></p>
<h4>SparkFun Products</h4>
<ul>
<li><a href="https://www.sparkfun.com/products/12049">LilyPad Arduino USB - ATmega32U4 Board</a> (DEV-12049)</li>
<li><a href="https://www.sparkfun.com/products/12640">Pro Micro - 5V/16MHz</a> (DEV-12640)</li>
<li><a href="https://www.sparkfun.com/products/12587">Pro Micro - 3.3V/8MHz</a> (DEV-12587)</li>
<li><a href="https://www.sparkfun.com/products/11520">Fio v3 - ATmega32U4</a> (DEV-11520)</li>
<li><a href="https://www.sparkfun.com/products/13614">Qduino Mini</a> (DEV-13614)</li>
<li><a href="https://www.sparkfun.com/products/11511">Makey Makey - Standard Kit</a> (WIG-11511)</li>
<li><a href="https://www.sparkfun.com/products/11519">Makey Makey Deluxe Kit</a> (WIG-11519)</li>
</ul><h3>SparkFun Clocks, Oscillators and Resonators</h3>
This library contains the real-time clocks, oscillators, resonators, and crystals we use.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>5x3.2mm SMD Crystal</h3>
<p>Example: <a href="https://www.sparkfun.com/products/94">16MHz SMD Crystal</a> (<a href="https://www.sparkfun.com/datasheets/Components/SPK-5032-16MHZ.pdf">Datasheet</a>)</p>>NAME>VALUE<h3>HC49/US 11.6x4.6mm PTH Crystal</h3>
<p><a href="https://www.digikey.com/Web%20Export/Supplier%20Content/Citizen_300/PDF/Citizen_HC49US.pdf?redirected=1">Example Datasheet</a></p>>NAME>VALUE<h3>HC49/U 11.6x4.6mm PTH Crystal (13.46mm height)</h3>
<p><a href="https://www.digikey.com/Web%20Export/Supplier%20Content/Citizen_300/PDF/Citizen_HC49US.pdf?redirected=1">Example Datasheet</a></p>>NAME>VALUE<h3>3x8mm Cylindrical Can (Radial) PTH Crystal</h3>
This is the "KIT" version, which has limited top masking for improved ease of assembly.
<p>Example product: <a href="https://www.sparkfun.com/products/540">32kHz crystal</a></p>
<p><a href="http://www.ecsxtal.com/store/pdf/ECS-3x8.pdf">Example datasheet</a> (ECS-3X8)</p>>NAME>VALUE<h3>2x6mm Cylindrical Can (Radial) PTH Crystal</h3>
<p>Example product: <a href="https://www.sparkfun.com/products/540">32kHz crystal</a></p>
<p><a href="http://www.ecsxtal.com/store/pdf/ECS-3x8.pdf">Example datasheet</a> (ECS-2X6)</p>>NAME>VALUE<h3>HC-49/UP 11.4x4.8mm SMD Crystal</h3>
<p><a href="http://www.standardcrystalcorp.com/pdf%5Cc-3.pdf">Example Datasheet</a></p>>NAME>VALUE<h3>6.0x2.0mm Cylindrical Can (Radial) SMD Crystal</h3>
<p><a href="http://cfm.citizen.co.jp/english/product/pdf/CMR200T.pdf">Example</a></p>>Name>Value<h3>7x1.5mm MC-146 Flat Lead SMD Crystal</h3>
<p><a href="https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-156_en.pdf">Example Datasheet</a></p>>Name>Value<h3>2x6mm Cylindrical Can (Radial) PTH Crystal</h3>
This is the "KIT" version, which has limited top masking for improved ease of assembly.
<p>Example product: <a href="https://www.sparkfun.com/products/540">32kHz crystal</a></p>
<p><a href="http://www.ecsxtal.com/store/pdf/ECS-3x8.pdf">Example datasheet</a> (ECS-2X6)</p>>NAME>VALUE<h3>5x3.2mm 2-pad SMD Crystal</h3>
<p><a href="http://www.txccrystal.com/images/pdf/7a.pdf">Example Datasheet</a></p>>NAME>VALUE<h3>3.2 x 1.5mm SMD Crystal Package</h3>
<p>Example: <a href="http://www.sii.co.jp/en/quartz/files/2013/03/file_PRODUCT_MASTER_50812_GRAPHIC03.pdf">SX-32S</a></p>>Name>Value<h3>3.2 x 2.5mm SMD Crystal Package</h3>
<p>Example: <a href="http://www.digikey.com/product-search/en?keywords=SER3627TR-ND">SX-32S</a></p>>Name>Value5x3.2mm SMD Crystal
Example: 16MHz SMD Crystal (Datasheet)HC49/US 11.6x4.6mm PTH Crystal
Example DatasheetHC49/U 11.6x4.6mm PTH Crystal (13.46mm height)
Example Datasheet3x8mm Cylindrical Can (Radial) PTH Crystal
This is the "KIT" version, which has limited top masking for improved ease of assembly.
Example product: 32kHz crystal
Example datasheet (ECS-3X8)2x6mm Cylindrical Can (Radial) PTH Crystal
Example product: 32kHz crystal
Example datasheet (ECS-2X6)HC-49/UP 11.4x4.8mm SMD Crystal
Example Datasheet6.0x2.0mm Cylindrical Can (Radial) SMD Crystal
Example7x1.5mm MC-146 Flat Lead SMD Crystal
Example Datasheet2x6mm Cylindrical Can (Radial) PTH Crystal
This is the "KIT" version, which has limited top masking for improved ease of assembly.
Example product: 32kHz crystal
Example datasheet (ECS-2X6)5x3.2mm 2-pad SMD Crystal
Example Datasheet3.2 x 1.5mm SMD Crystal Package
Example: SX-32S3.2 x 2.5mm SMD Crystal Package
Example: SX-32S<h3>Crystal (no ground pin)</h3>>NAME>VALUE12<h3>Crystals (Generic)</h3>
<p>These are <b>passive</b> quartz crystals, which can be used as a clock source for a microcontroller.</p>
<p>Crystal's are two-terminal devices. They require external "load" capacitors to generate an oscillating signal.</p><h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Plated Through Hole - 2x3</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x3 No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -10 Pin</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -10 Pin 2mm</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/XBee-Connector.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -10 Pin 2mm SMD</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Sockets/xbeeheadersmd.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -10 Pin Locking Footprint</h3>
Holes are offset 0.005" to hold pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -10 Pin Locking Footprint with Long Pads</h3>
Holes are offset 0.005" to hold pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>SMD -10 Pin</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>SMD -10 Pin</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -10 Pin No Silk</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -10 Pin Locking Footprint - NO SILK</h3>
Holes are offset 0.005" to hold pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>USB Type Mini-B Surface Mounted</h3>
<p>Specifications:
<ul><li>Pin count: 5 main, 4 shield pins</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/miniUSB-Dimensional.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>USB_Mini-B</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x3 Shrouded Header</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Shrouded-10pin.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Surface Mount - 2x3 Male Header with Keying Posts</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/15881.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x3 Pogo Pins</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Surface Mount - 2x3</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:2.54mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 5 Pin</h3>
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 5 Pin</h3>
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch: 1.27mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 5 Pin with Locking Footprint</h3>
Holes are offset 0.005" from center, locking pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 5 Pin Long Pad with Locking Footprint</h3>
Holes are offset 0.005" from center, locking pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 5 Pin Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>SMD - 5 Pin</h3>
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://www.sparkfun.com/datasheets/GPS/EM408-SMDConnector.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_05</li>
<li>EM-408</li>
</ul></p>>NAME>VALUE<h3>SMD - 5 Pin Right Angle</h3>
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 5 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>JST 5 Pin Right Angle Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count: 5</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>JST 5 Pin Vertical Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count: 5</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -5 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 5</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUEPlated Through Hole - 2x3
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_03x2
Plated Through Hole - 2x3 No Silk Outline
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_03x2
Plated Through Hole -10 Pin
Specifications:
Pin count:10
Pin pitch:0.1"
Example device(s):
CONN_10
Plated Through Hole -10 Pin 2mm
Specifications:
Pin count:10
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_10
Plated Through Hole -10 Pin 2mm SMD
Specifications:
Pin count:10
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_10
Plated Through Hole -10 Pin Locking Footprint
Holes are offset 0.005" to hold pins in place while soldering.
Specifications:
Pin count:10
Pin pitch:0.1"
Example device(s):
CONN_10
Plated Through Hole -10 Pin Locking Footprint with Long Pads
Holes are offset 0.005" to hold pins in place while soldering.
Specifications:
Pin count:10
Pin pitch:0.1"
Example device(s):
CONN_10
SMD -10 Pin
Specifications:
Pin count:10
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_10
SMD -10 Pin
Specifications:
Pin count:10
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_10
Plated Through Hole -10 Pin No Silk
Specifications:
Pin count:10
Pin pitch:0.1"
Example device(s):
CONN_10
Plated Through Hole -10 Pin Locking Footprint - NO SILK
Holes are offset 0.005" to hold pins in place while soldering.
Specifications:
Pin count:10
Pin pitch:0.1"
Example device(s):
CONN_10
USB Type Mini-B Surface Mounted
Specifications:
Pin count: 5 main, 4 shield pins
Datasheet referenced for footprint
Example device(s):
USB_Mini-B
Plated Through Hole - 2x3 Shrouded Header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_03x2
Surface Mount - 2x3 Male Header with Keying Posts
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_03x2
Plated Through Hole - 2x3 Pogo Pins
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_03x2
Surface Mount - 2x3
Specifications:
Pin count:6
Pin pitch:2.54mm
Example device(s):
CONN_03x2
Plated Through Hole - 5 Pin
Specifications:
Pin count:5
Pin pitch:0.1"
Example device(s):
CONN_05
Plated Through Hole - 5 Pin
Specifications:
Pin count:5
Pin pitch: 1.27mm
Example device(s):
CONN_05
Plated Through Hole - 5 Pin with Locking Footprint
Holes are offset 0.005" from center, locking pins in place during soldering.
Specifications:
Pin count:5
Pin pitch:0.1"
Example device(s):
CONN_05
Plated Through Hole - 5 Pin Long Pad with Locking Footprint
Holes are offset 0.005" from center, locking pins in place during soldering.
Specifications:
Pin count:5
Pin pitch:0.1"
Example device(s):
CONN_05
Plated Through Hole - 5 Pin Long Pads
Specifications:
Pin count:5
Pin pitch:0.1"
Example device(s):
CONN_05
SMD - 5 Pin
Specifications:
Pin count:5
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_05
EM-408
SMD - 5 Pin Right Angle
Specifications:
Pin count:5
Pin pitch:0.1"
Example device(s):
CONN_05
Plated Through Hole - 5 Pin No Silk Outline
Specifications:
Pin count:5
Pin pitch:0.1"
Example device(s):
CONN_05
JST 5 Pin Right Angle Plated Through Hole
Specifications:
Pin count: 5
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_05
JST 5 Pin Vertical Plated Through Hole
Specifications:
Pin count: 5
Pin pitch: 2mm
Example device(s):
CONN_05
Screw Terminal 3.5mm Pitch -5 Pin PTH
Specifications:
Pin count: 5
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_05
<h3> 10 Pin Connection</h3>>VALUE>NAME<h3>USB - 5 pin</h3>
<p>5 pin USB connector: VBUS, GND, D+, D-, ID </p>
<p>Includes 4 pins for shield connections </p>USB>VALUE>NAME<h3>6 Pin Connection</h3>
3x2 pin layout>NAME>VALUE<h3>5 Pin Connection</h3>>VALUE>NAME<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
<li><a href="https://www.sparkfun.com/products/11376"> Arduino Stackable Header - 10 Pin</a> (PRT-11376)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208
<p></p>
NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS...
This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side.<h3>USB type Mini-B Connector</h3>
<p>Breaks out 5th pin, and includes shield pins if needed.</p>
<p>SparkFun Products:
<ul><li><a href="https://www.sparkfun.com/products/9716”>SparkFun FTDI Basic Breakout</a></li>
<li><a href="https://www.sparkfun.com/products/11812”>SparkFun XBee Explorer USB</a></li>
<li><a href=”https://www.sparkfun.com/products/12757”>SparkFun Redboard</a></li>
</ul></p><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<p></p>
<b>You can populate with any combo of single row headers, but if you'd like an exact match, check these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/12807"> Header - 2x3 (Male, 0.1")</a> (PRT-12807)</li>
<li><a href="https://www.sparkfun.com/products/13010"> Header - 2x3 (Female, 0.1")</a> (PRT-13010)</li>
<li><a href="https://www.sparkfun.com/products/10877"> 2x3 Pin Shrouded Header</a> (PRT-10877)</li>
</ul>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b>Special note: the shrouded connector mates well with our 3x2 ribbon cables:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/10651"> Ribbon Crimp Connector - 6-pin (2x3, Female)</a> (PRT-10651)</li>
<li><a href="https://www.sparkfun.com/products/10646"> Ribbon Cable - 6 wire (15ft)</a> (PRT-10646)</li>
</ul><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208<h3>SparkFun Resistors</h3>
This library contains resistors. Reference designator:R.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>AXIAL-0.3</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>>Name>Value<h3>AXIAL-0.3-KIT</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>
<p><b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>>NAME>VALUE<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 2012 (0805) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 3216 (1206) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEAXIAL-0.3
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.AXIAL-0.3-KIT
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.
Warning: This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.Generic 1005 (0402) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 2012 (0805) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 3216 (1206) package
0.2mm courtyard excess rounded to nearest 0.05mm.>NAME>VALUEGeneric Resistor Package<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.4 x 4.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.5 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 3 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 4 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 5 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 6 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm + 5 mm, outline 2.4 x 7 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 2.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 3.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 4.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 5.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 2.4 x 4.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 2.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 4.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 3 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 5.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 7.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
Horizontal, grid 5 mm, outline 7.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 3.2 x 10.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 4.2 x 10.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 5.2 x 10.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 4.3 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 5.4 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 6.4 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 5.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 6.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 7.2 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 8.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 9.1 x 18.2 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 6.2 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 7.4 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 8.7 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 10.8 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 11.3 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 9.3 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 11.3 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 13.4 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 20.5 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 13.7 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 16.2 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 18.2 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 19.2 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 20.3 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 3.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 15.5 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 6.3 x 10.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 15.4 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 17.3 x 31.6 mm>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0204 Reflow solder</b><p>
Metric Code Size 1005>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0603 Reflow solder</b><p>
Metric Code Size 1608>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0805 Reflow solder</b><p>
Metric Code Size 2012>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1206 Reflow solder</b><p>
Metric Code Size 3216>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1210 Reflow solder</b><p>
Metric Code Size 3225>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1812 Reflow solder</b><p>
Metric Code Size 4532>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1825 Reflow solder</b><p>
Metric Code Size 4564>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 2220 Reflow solder</b><p>
Metric Code Size 5650>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 2225 Reflow solder</b><p>
Metric Code Size 5664>NAME>VALUE>NAME>VALUE<B>CAPACITOR</B>, American symbol<h3>SparkFun LEDs</h3>
This library contains discrete LEDs for illumination or indication, but no displays.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<B>LED 5mm PTH</B><p>
5 mm, round
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 5mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED-IR-THRU</li>>NAME>VALUE<h3>LED 3MM PTH</h3>
3 mm, round.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 3mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: </li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<B>LED 0603 SMT</B><p>
0603, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:0.075inch </li>
<li>Area: 0.06" x 0.03"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED - BLUE</li>>NAME>VALUE<B>LED 10mm PTH</B><p>
10 mm, round
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.2inch</li>
<li>Diameter: 10mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li>LS>NAME>VALUE<B>LED 1206 SMT</B><p>
1206, surface mount
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Area: 0.125"x 0.06" </li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li>>NAME>VALUE<h3>LED 3MM PTH- No Silk</h3>
3 mm, round, no silk outline of package
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 3mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<h3>LED 5mm KIT PTH</h3>
<p>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 5mm</li>
</ul></p>
<p>Example Device:
<ul><li>LED</li>
</ul></p>>NAME>VALUE<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUELED 5mm PTH
5 mm, round
Specifications:
Pin count: 2
Pin pitch: 0.1inch
Diameter: 5mm
Example device(s):
LED-IR-THRULED 3MM PTH
3 mm, round.
Specifications:
Pin count: 2
Pin pitch: 0.1inch
Diameter: 3mm
Example device(s):
LEDLED 1206 SMT
1206, surface mount.
Specifications:
Pin count: 2
Pin pitch:
Area: 0.125" x 0.06"
Example device(s):
LEDLED 0603 SMT
0603, surface mount.
Specifications:
Pin count: 2
Pin pitch:0.075inch
Area: 0.06" x 0.03"
Example device(s):
LED - BLUELED 10mm PTH
10 mm, round
Specifications:
Pin count: 2
Pin pitch: 0.2inch
Diameter: 10mm
Example device(s):
LEDLED 1206 SMT
1206, surface mount
Specifications:
Pin count: 2
Area: 0.125"x 0.06"
Example device(s):
LEDLED 3MM PTH- No Silk
3 mm, round, no silk outline of package
Specifications:
Pin count: 2
Pin pitch: 0.1inch
Diameter: 3mm
Example device(s):
LEDLED 5mm KIT PTH
Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
Specifications:
Pin count: 2
Pin pitch: 0.1inch
Diameter: 5mm
Example Device:
LED
LED 1206 SMT
1206, surface mount.
Specifications:
Pin count: 2
Area: 0.125" x 0.06"
Example device(s):
LED<h3>LED</h3>
<p></p>>NAME>VALUE<b>LED (Generic)</b>
<p>Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. Generic LEDs with no color specified.</p><h3>SparkFun Switches, Buttons, Encoders</h3>
In this library you'll find switches, buttons, joysticks, and anything that moves to create or disrupt an electrical connection.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Momentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-1000)</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 4.5mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://spec_sheets.e-switch.com/specs/P010338.pdf">Dimensional Drawing</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - PTH, 12mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-5050)</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 6.0 x 3.5 mm</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.sparkfun.com/datasheets/Components/1101.pdf">Datasheet</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 6.2mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://www.apem.com/files/apem/brochures/ADTS6-ADTSM-KTSC6.pdf">Datasheet</a> (ADTSM63NVTR)</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - PTH, Right-angle</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://cdn.sparkfun.com/datasheets/Components/Switches/SW016.JPG">Dimensional Drawing</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 12mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://cdn.sparkfun.com/datasheets/Components/Switches/N301102.pdf">Datasheet</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>
<p><a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-1000)</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 5.2mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.sparkfun.com/datasheets/Components/Buttons/SMD-Button.pdf">Dimensional Drawing</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, Right-angle</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 4.6 x 2.8mm</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://www.ck-components.com/media/1479/kmr2.pdf">Datasheet</a></p>>Name>ValueMomentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Datasheet (B3F-1000)Momentary Switch (Pushbutton) - SPST - SMD, 4.5mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Dimensional DrawingMomentary Switch (Pushbutton) - SPST - PTH, 12mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Datasheet (B3F-5050)Momentary Switch (Pushbutton) - SPST - SMD, 6.0 x 3.5 mm
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
DatasheetMomentary Switch (Pushbutton) - SPST - SMD, 6.2mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Datasheet (ADTSM63NVTR)Momentary Switch (Pushbutton) - SPST - PTH, Right-angle
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Dimensional DrawingMomentary Switch (Pushbutton) - SPST - SMD, 12mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
DatasheetMomentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
Datasheet (B3F-1000)Momentary Switch (Pushbutton) - SPST - SMD, 5.2mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Dimensional DrawingMomentary Switch (Pushbutton) - SPST - SMD, Right-angle
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).Momentary Switch (Pushbutton) - SPST - SMD, 4.6 x 2.8mm
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Datasheet<h3>Momentary Switch (Pushbutton) - SPST</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>>NAME>VALUE<h3>Momentary Switch (Pushbutton) - SPST</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<h4>Variants</h4>
<h5>PTH-12MM - 12mm square, through-hole</h5>
<ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul>
<h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5>
<ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li>
<li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul>
<h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5>
<ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">
SparkFun BigTime Watch Kit</a></li></ul>
<h5>SMD-12MM - 12mm square, surface-mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li>
<li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul>
<h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5>
<ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul>
<h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5>
<ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul>
<h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li>
<li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li>
<li>REDUNDANT package connects both switch circuits together</li></ul>
<h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul>
<h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li>
<li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul>
<h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5>
<ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel® Edison - Arduino</a></li></ul><h3>SparkFun Capacitors</h3>
This library contains capacitors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 2012 (0805) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 3216 (1206) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEGeneric 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 1005 (0402) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 2012 (0805) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 3216 (1206) package
0.2mm courtyard excess rounded to nearest 0.05mm.>NAME>VALUE<h3>1µF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.