#include <IRremote.h>

int RECV_PIN = 11;

IRrecv irrecv(RECV_PIN);

decode_results results;

void setup()
{
  Serial.begin(9600);
  // In case the interrupt driver crashes on setup, give a clue
  // to the user what's going on.
  Serial.println("Enabling IRin");
  irrecv.enableIRIn(); // Start the receiver
  Serial.println("Enabled IRin");
  pinMode(5, OUTPUT);
  pinMode(3, OUTPUT);
}

void loop() {
  if (irrecv.decode(&results)) {
    Serial.println(results.value, HEX);
    irrecv.resume(); // Receive the next value

    if ((results.value) == 0x1FE50AF) 
    {
     digitalWrite(5, HIGH); 
     digitalWrite(3, HIGH);
     Serial.println("LED ON");
    }
    else
    {
      
     digitalWrite(5, LOW); 
     digitalWrite(3, LOW);
      Serial.println("LED OFF");
    }
     
  }
  delay(100);
}