#include <Stepper.h>

const int stepsPerRevolution = 200;  // change this to fit the number of steps per revolution for your motor
 


Stepper myStepper(stepsPerRevolution, 7, 8, 9, 10);
#define led 2
void setup() {
  
  // set the speed at 60 rpm:
  myStepper.setSpeed(60);
 
  Serial.begin(9600);
}

void loop() {
  // step one revolution  in one direction:
  Serial.println("clockwise");
  myStepper.step(stepsPerRevolution);
  digitalWrite(led,HIGH);
  delay(1000);
  digitalWrite(led, LOW);    
  delay(500);


}