Week 16

Group Assignmet page

- actuate and automate your machine
- document the group project and your individual contribution

To operate the stepper motor, we used GRBL.

Meanwhile, the grinding rod was not fixed properly, and the grinding rod was firmly fixed with the glue gun.

We used to dissolve plastics in earnest and the material used was pellets.

I have used Classmate JI so he was totally in charge and his temperature is as follows.



During the warm-up, I tried to get GRBL working and looked for what commands to use.

command.

We did not find the proper value and I used a lot of plastic..