<<<<<<<=Go Back To Home <<<<<=Previous Week || Next Week>>>>>

Week 6 : 3D Scanning and Printing



3D Printing

3D printing or addictive manufacturing is a process of making three dimensional solid objects from a digital file. The creation of 3D printed object is achieved using addictive process. In an addictive process and object is created by extruding the heated material such that sucessive layers are fused to create the object from nothing and the entire object is created with layers of the material vertically arranged one top of other. The nozzlehead moves in X-Y direction and the buildplate is capable to move in the Z-direction.

 3d printers

In our Fablab we have the DIMENSION sst 1200es and ULTIMAKER 2.There are several ways to print and all those available are additive, differing mainly in the way layers are build to create the final object. Some methods use melting or softening material to produce the layers. Selective Laser Sintering (SLS) and Fused Deposition Modeling (FDM) are the most common technologies using this way of 3D printing. Another method is curing a photo-reactive resin with a UV laser or another similar power source which cure one layer at a time. The most common method for this is called Stereolithography (SLA). The above two printers use Fused Deposition Modeling (FDM) process.

Ultimaker 2

Ultimaker

The specification of ultimaker 3D printer is mentioned below.

  • Print technology:- Fused Deposition Modeling (FDM)
  • Build volume:- 210 x 210 x 205 mm max
  • Layer resolution:- 0.2 mm to 0.020 mm
  • Nozzle diameter:- 0.4 mm
  • XYZ accuracy:- 12.5, 12.5, 5 micron
  • Nozzle temperature:- 180 degree celsius to 260 degree Celsius
  • Operating sound:- 57 dBA
  • Supported file types:- STL
  • Software for ultimaker printer:- cura
  •  3d print

    Ultimaker uses ABS Plastics (Acrylonitrile butadiene styrene), PLA (Polylactic Acid), and CPE (Copolyester) mainly as material. Here in our Lab we use PLA.

    material

    The material comes in spools and it is loaded through a slot in the back of the printer

    setting1

    There is a touch sensing roller button with which we could select different options, before printing we should set the building plate, insert the material to the nozzle and heat the nozzle

    nozzletemperture

    Heating the nozzle to 240 degree celsius (our 3D printer) for the PLA to fuse and started flowing from the nozzle

    Testing the limits of our 3D Printer

    Test 1

    test 1

    We got the file from Thingiverse

    Dimensions

  • size: the object is 4x50x50mm (baseplate)
  • hole size: 3 holes (3/4/5mm)
  • Nut size: M4 Nut should fit perfectly
  • fine details: pyramide, cone, all numbers
  • rounded print: wave, half sphere
  • minimum distance between walls: 0.1/0.2/0.3/0.4/0.5mm
  • overhang: 25°/30°/35°/40°/45°
  • bridge print: 2/3/4/5/6/7/8/9mm
  • surface: all the flat parts
  • We have given the layer thickness 0.1 mm, 30% infill and enabled retraction with about 60 mm/s print speed

    result of test

    Result

    After printing the results,holes were good but not measuring 2.8mm, 3.71mm . The M4 nut is fitting perfectly, pyramid, cone has good finishing. Wave and half sphere is good. Walls have some defects, overhangs cameout well and the bridges were complete apart oneside and fonts were not completely readable.

    As we got some defects we decided to go for 2nd test with another design

    Test 2

    test 2

    We got the file from Thingiverse

    Dimensions

  • 01 Nut, Size M4 Nut should fit perfectly
  • 02 Wave, rounded print
  • 05 Holes, Size 3, 4, 5 mm
  • 06 minimal Distance: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7 mm
  • 07 Z height: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1 mm
  • 08 Wall Thickness: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7 mm
  • 09 Bridge Print: 2, 4, 8, 16 mm
  • 10 Sphere, Rounded Print 4.8mm height
  • 11 Sphere Mix, 7 mm height
  • 12 Pyramide, 7 mm height
  • 13 Overhang: 25, 30, 35, 40, 45, 50, 55, 60, 65, 70
  • 14 Warp, does it bend?
  • 15 3D Print Font, optimized for 3D printing
  • 16 Surface, Flatness
  • 17 Size, 100 x 100mm x 23.83 (10mm width)
  • 18 Spike, minimum Layer Time, 21 mm height from Bottom (include Baseplate)
  • 19 Hole in Wall, 4 mm diameter, check for proper print
  • 20 Raft Test, raft should be just under the model
  • 21 Retract Travel, check retract settings for longer travel
  • result print

    First we printed in the Ultimaker

    we used layer thickness 0.1 mm for this test. But the defects were that the wall thickness of 0.1-0.4 mm were missing, the bridges except at 2 mm were not good, and the overhangs at lesser angle need more support.

    result print

    Then we printed another one on the Dimension, the 3D print from Dimension is more finished.

    My Work

    I designed a dump truck on Solidworks, and decided to print it.

    curascreenshot
  • The file is to be opened in any print slicing software to set up the G-code.
  • Incase of Ultimaker we use Cura software for slicing
  • curascreenshot

  • In Cura, we set the layer thickness, infill density , retraction , support system , print speed etc.. and generate the corresponding G code
  • Then it is transferred to the SD card of the printer.The printer can only recognise the Gcode to print the desired object.
  • heatingupmachine

  • After inserting the SD card, check whether the material is inserted and click the print
  • The nozzle should get first to be heat up for the material to start extrude
  • truckprintingtopview

    And it was printing

    truckfailed smbc

    My first printing experiment was failed when somebody switched off the cooling fan of the adapter of 3D printer. In our fablab a separate cooling fan is kept for the power supply adapter of the Ultimaker, maybe it is overheating. My printing was stopped in the middle because someone switched off the cooling fan

    truckprintingtopview2

    Then i printed again , this time it was fine

    truckprinting

    truckprinting2

    truckprintinglast

    truckprinttop

    truckonhand

    Now my dump truck was ready, dimesion was 36mm x25mm x22 mm

    truck dumping truck dumping

    I then increased the scale a bit and made little bit larger version (scaled it double) of the truck. I placed some candys in it.

    Wheels for my Project

    I designed Wheels for my project( which i never used), See below

    I designed it on Solidworks

    wheel

    3D Scanning

    3D Scanner is a device which captures the 360 3d view of any objects or surroundings, the captured data can be later used to generate 3d models.

    Kinect

    KINECT

    Kinect for Xbox 360 is the 3d scanner used in our Fablab. It is a line motion sensing input device developed by Microsoft for the Xbox 360. Kinect has an infrared projector , a camera and a special microchip that generates a grid from which the location of a nearby object in 3 dimensions can be ascertained. The device features an RGB camera, depth sensor and multi-array microphone running proprietary software, which provide full-body 3D motion capture, facial recognition and voice recognition capabilities.

    Kinect requires the Xbox drivers to be installed on the operating system, the drivers are free to download in the Microsoft website. Then we should also need a 3D scanning software for scanning. Kinect itself requires a power source and also there is a usb to connect it to the computer system.

    ReconstructMe

    Reconstruct Me is a powerful 3D real-time scanning system.Reconstruct Me usage concept is similar to that of an ordinary video camera – simply move around the object to be modelled in 3D. Scanning with Reconstruct Me scales from smaller objects such as human faces up to entire rooms.

    I decided to scan myself as a model.

    myscan1 myscan2 myscan3

    myscan4 myscan5

    The scanned 3D model in 3D viewer

    myscan4 myscan5

    I opened the 3D model in Autodesk Meshmixer for closing the holes and making the 3D model a solid object.

    scan

    Then i opened the Stl file in Cura to generate a G-code

    Conclusion

  • This week was very interesting, i was very curious on how to 3D print and now i am happy that i learn to operate a 3D printer. Now i can confidently go near one and also print myself somethings.
  • Also i had lot of fun with my team at Fablab whilke scanning different objects and ourselves
  • Creative Commons License
    This work by Aby Michael is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.