#include <SoftwareSerial.h>

SoftwareSerial serial(1, 0); //PIN 12 AND PIN 13 ATTINY44  (RX,TX)
const int LED_RED = 7;
const int LED_GREEN = 9;
const int LED_BLUE = 10;

const int MOTOR = 8;


void setup() 
{
  serial.begin(9600);
  pinMode(LED_RED,   OUTPUT);
  pinMode(LED_GREEN, OUTPUT);
  pinMode(LED_BLUE,   OUTPUT);
  pinMode(MOTOR, OUTPUT);

  digitalWrite(LED_RED,1); 
  digitalWrite(LED_GREEN,1); 
  digitalWrite(LED_BLUE,1); 
  digitalWrite(MOTOR,0); 
}

void loop() 
{
  if (serial.available())
  {
    char inChar = (char)serial.read();
  }
  
  digitalWrite(LED_RED,1); 
  digitalWrite(LED_GREEN,1); 
  digitalWrite(LED_BLUE,1); 
  
  digitalWrite(MOTOR,0); 
  digitalWrite(LED_GREEN,0);
  delay(1000); 
  digitalWrite(LED_GREEN,1); 
  digitalWrite(LED_RED,0);
  delay(1000);
  digitalWrite(LED_RED,1);
  digitalWrite(LED_BLUE,0); 
  delay(1000);
  digitalWrite(LED_BLUE,1); 

  for(int i=0;i<255;i++)
  {
    analogWrite(MOTOR,i);
    delay(100);
  }

}