'----------------------------------------------------------------
'SHOPBOT ROUTER FILE IN MM
'GENERATED BY PARTWorks
'Minimum extent in X = 0.000 Minimum extent in Y = 0.000 Minimum extent in Z = -15.000
'Maximum extent in X = 2440.000 Maximum extent in Y = 1220.000 Maximum extent in Z = 0.000
'Length of material in X = 2440.000
'Length of material in Y = 1220.000
'Depth of material in Z = 15.000
'Home Position Information = Bottom Left Corner, Material Surface 
'Home X = 0.000000 Home Y = 0.000000 Home Z = 50.000000
'Rapid clearance gap or Safe Z = 50.000
'UNITS:MM
'
IF %(25)=0 THEN GOTO UNIT_ERROR	'check to see software is set to standard
SA                             	'Set program to absolute coordinate mode
CN, 90
'New Path
'Toolpath Name = Drill 1
'Tool Name   = Straight 6,0mm  (48-005)

&PWSafeZ = 50.000
&PWZorigin = Material Surface
&PWMaterial = 15.000
'&ToolName = "Straight 6,0mm  (48-005)"
&Tool =2                    'Jog Z axis to safe height
C9
TR,14000
C6                   'Return tool to home in x and y
PAUSE 2
'
MS,75.9,25.3
JZ,50.000000
J2,0.000000,0.000000
J3,28.615999,33.233002,50.000000
J3,28.615999,33.233002,6.000000
M3,28.615999,33.233002,-1.500000
J3,28.615999,33.233002,50.000000
J3,245.380997,197.048004,50.000000
J3,245.380997,197.048004,6.000000
M3,245.380997,197.048004,-1.500000
J3,245.380997,197.048004,50.000000
J3,734.192993,495.990997,50.000000
J3,734.192993,495.990997,6.000000
M3,734.192993,495.990997,-1.500000
J3,734.192993,495.990997,50.000000
J3,1012.245972,742.533020,50.000000
J3,1012.245972,742.533020,6.000000
M3,1012.245972,742.533020,-1.500000
J3,1012.245972,742.533020,50.000000
J3,1324.982056,398.358002,50.000000
J3,1324.982056,398.358002,6.000000
M3,1324.982056,398.358002,-1.500000
J3,1324.982056,398.358002,50.000000
J3,1071.814941,221.306000,50.000000
J3,1071.814941,221.306000,6.000000
M3,1071.814941,221.306000,-1.500000
J3,1071.814941,221.306000,50.000000
J3,1467.286011,62.455002,50.000000
J3,1467.286011,62.455002,6.000000
M3,1467.286011,62.455002,-1.500000
J3,1467.286011,62.455002,50.000000
J3,1660.885010,277.565002,50.000000
J3,1660.885010,277.565002,6.000000
M3,1660.885010,277.565002,-1.500000
J3,1660.885010,277.565002,50.000000
J3,2139.090088,102.167999,50.000000
J3,2139.090088,102.167999,6.000000
M3,2139.090088,102.167999,-1.500000
J3,2139.090088,102.167999,50.000000
J3,2420.387939,22.743000,50.000000
J3,2420.387939,22.743000,6.000000
M3,2420.387939,22.743000,-1.500000
J3,2420.387939,22.743000,50.000000
J3,2248.300049,1157.860962,50.000000
J3,2248.300049,1157.860962,6.000000
M3,2248.300049,1157.860962,-1.500000
J3,2248.300049,1157.860962,50.000000
J3,2420.387939,1192.609009,50.000000
J3,2420.387939,1192.609009,6.000000
M3,2420.387939,1192.609009,-1.500000
J3,2420.387939,1192.609009,50.000000
J3,1619.516968,1104.911011,50.000000
J3,1619.516968,1104.911011,6.000000
M3,1619.516968,1104.911011,-1.500000
J3,1619.516968,1104.911011,50.000000
J3,709.799011,1126.240967,50.000000
J3,709.799011,1126.240967,6.000000
M3,709.799011,1126.240967,-1.500000
J3,709.799011,1126.240967,50.000000
J3,318.096985,843.411011,50.000000
J3,318.096985,843.411011,6.000000
M3,318.096985,843.411011,-1.500000
J3,318.096985,843.411011,50.000000
J3,50.507999,1171.485962,50.000000
J3,50.507999,1171.485962,6.000000
M3,50.507999,1171.485962,-1.500000
J3,50.507999,1171.485962,50.000000
JZ,50.000000
J2,0.000000,0.000000
'
'Turning router OFF
C7
END
'
'
UNIT_ERROR:
CN, 91                            'Run file explaining unit error
END