This week is the project development. I will summarize the progress of the project, what remains to be done and also what has not worked as expected.

Final project development


Completed task and remain task.

Tasks completed.

  • The design of the wooden frame is finished.
  • The design of the bottom container is finished.
  • The design of the top container is finished.
  • The design of the peristaltic pump is finished.
  • The light board is a designed.
  • The main board is a designed.
  • The motor stepper drive board is a designed.
  • Components are ordered.
  • Laser cutting of the wooden frame is complete.
  • The peristaltic pump is assembled.
  • The code is finished.
  • Remain taks

  • To assemble the wooden frame.
  • Design the distance sensor holder.
  • Design the light and light sensor holder.
  • To print the distance sensor holder.
  • To print the light and the light sensor holder.
  • To solder the light board.
  • To solder the main board.
  • To solder the stepper motor drive board.
  • To wire the different sensors.
  • To print top and bottom container.
  • To test the program.
  • To assemble all parts together.
  • Film the video of the project.
  • Document the project.


  • What has worked? what hasn't?

    Everything that has been done so far is working as expected except for the peristaltic pump. The problem is that I forgot to leave a space between my two moving parts. This causes the two parts to insert one into the other but much too tight. I must therefore reprint the outer part with a distance between the two parts of 1 mm. This will reduce friction between the two parts.

    What questions need to be resolved?

    The only question I have right now is I'm not sure if I will have a water resistance problem for the water containers.

    What will happen when?

  • To assemble the wooden frame. (June 12)
  • To solder the light board.(June 12)
  • To solder the main board.(June 12)
  • To print top and bottom container. (June 12)
  • To solder the stepper motor drive board.(June 13)
  • Design the distance sensor holder.(June 14)
  • Design the light and light sensor holder.(June 14)
  • To assemble all parts together. (June 14)
  • To wire the different sensors. (June 15)
  • To test the program. (June 15)
  • Film the video of the project. (June 16)
  • Document the project. (June 17-18)


  • What have you learned?

    The most important thing I learned that answers my question from week 13 is how to design a stepper motor drive. It's a big part of my project and I'm glad I learned that. I also learned how to design better in Fusion 360 with several components. In the pump project, I had 4 different components and 11 components in the water dispenser. I learned how to align the parts properly with each other and also how to work well with several components.