Task required:

Design and produce something with a digital fabrication process that is not covered in another assignment.

what I did ?

I chose to learn and use digital textile so I designed a gear in Fusion and used Janome Memory Craft 15000

Procedure

A design for gear made in Fusion as shown in the figure below



There is a software provided with the textile machine called Digitizer. In this software the design inserted and the properties of the textile can be prepared. After that the file should be save as DST format which can be open in the machine by using USB. The following steps and notes present the task procedure.



Drawing file for your reffrence:

GEAR design f3d

GEAR design dxf

GEAR design cdf