Commercial Board Policy
Updated for 2021 evaluation standards!
Fab Academy is an experience where you can focus on developing your ideas and skills in a unique, hands-on way. Developing custom boards and building on previously Fabbed boards is part of this valuable process. Rather than using commercial boards (arduinos etc) for your final project, you will create your own personal board.
If you still need to use a commercial board these is a non exhaustive list of acceptable uses.
Acceptable use of Commercial Boards
Embedded processor boards
More advanced processors than AVR microcontrollers can be used. They might come in different form factors (chips, boards). You can solder them to your board or connect them with connectors. The key to be accepted as part of your design is that these commercial processors are embedded in your board.
Commercial Arduinos or clones
These can be used as a extra nodes of a network that you have built, with the purpose of showing the network functionality of one of your fabricated boards. Networking between just commercial boards is not acceptable.
Single board computers: Raspberry Pi, Beaglebone etc
These can be used as a substitute for your desktop/laptop computer. They are super cheap computers capable of running full operating systems, like Linux and Windows. You still need to design your own interface board for your projects.
Commercial Board Exemption Process
If you think you have a special case where there should be raised an exemption please talk to your local or remote guru. The case will be addressed to the Global Evaluation Team for analysis - please see the above graphic showing the process.
In any case remember that Commercial Boards are not evaluated. They are not considered as your own work, but a necessary item for your work.
Have feedback? Open an issue!